Several kits are offered so a credit card / NFC reader can be installed in a soda vending machine that is wired for a single price coin changer.

Information on Nayax Touch and Cantaloupe credit card / NFC readers is found HERE.

The installation instructions include information on programming a card reader’s pulse interface attributes but needs to be customized based upon your desired payout. If the installer is not familiar with programming the attributes, we offer this service.

If you are only accepting payment by credit/debit card, use the kit that plugs into the Jones plug. The kit plugs directly into the Jones plug and the credit/debit card reader.

If will be installing a Nayax Touch, select Option 1 (kit CC-SPC-NAYAXTOUCH).

If you will be installing a Cantaloupe G10/G11, select Option 2 (kit CC-SPC-CANTALOUPE)

If you are accepting payment by coins, bill, and credit/debit card, then the kit that interfaces with a single price changer is required. This kit requires the installation of a harness in the changer that plugs into the Jones plug. No soldering is required. Holes will need to be drilled. The kit will interface with a Mars TRC 6800H changer, Coinco 3340.3341s, and Coinc93xxS changers.

If the telemeter installed will be a Nayax Touch and your changer is a TRC6800, select Option 3 (kit CCNAYAX-MTRC6800H).

If the telemeter installed will be a Nayax Touch and your changer is a Coinco 334xS/93xS, select Option 4 (kit CCNAYAX-COINCO-S).

If the telemeter installed will be a Cantaloupe G10/G11 and your changer is a TRC6800, select Option 5 (kit CCG11-MTRC6800H).

If the telemeter installed will be a Cantaloupe G10/G11 and your changer is a Coinco 334xS/93xS, select Option 6 (kit CCG11-COINCO-S).

Mars TRC600H Refurbished coin changer prewired with harness that connects to board is Option 7 (UCMTRC6800H-SPCHARNESS).